Model 2300

Home Products Contact Us

Model 10
Model 25
Model 30
Model 40
Model 60
Model 65
Model 110A
Model 1100A
Model 1150
Model 1175
Model 1180
Model 1200A
Model 1250
Model 1300
Model 1400A
Model 1420A
Model 1450
Model 1600
Model 1650
Model 2000T
Model 2150
Model 2200
Model 2300
Model 2500
Model 2800
Model 34xx

(Industrial)
Model 2300:     High Resolution 8-Channel Current Input Network Node

Datasheet     XIF File

Description

The Model 2300 is a High Resolution, 19-bit, 8-Channel Current Input Network Node that is housed in a compact DIN rail enclosure.  It allows integration of up to 8 current output transmitters into the LonWorks distributed digital network.  Using the Model 2300 allows multiple sensors to be used over a simple four-wire bus installation.  Two wires are used for power, the other are used for digital communication.  The communication interface is the FTT-10 transceiver.  

All connections to the Model 2300 are made via high quality removable terminal blocks.  Power into the Model 2300 is reverse voltage protected, individually fused, and finally made available to the sensor terminal blocks.  This feature allows simple power distribution to each 4-20 mA transmitter and reduces external wiring.  Additionally, the input current sense resistors are individually protected against over-current conditions by a unique circuit.  The protection circuit will limit the input current and return an error value to attached network device.  The protection circuit will automatically recover when the fault condition is removed and will resume normal measurement.

Key Features

bullet

8-Channel, 19-bit resolution, 0-25 mA input range

bullet

All connections are made via high-quality removable terminal blocks

bullet

Input power is distributed to each sensor’s terminal block to cut down on external wiring

bullet

Output power to each sensor is reverse voltage protected and fused.

bullet

Input sense resistor is protected from over-voltage

bullet

All inputs have factory default configuration of 4-20 mA, which allows instant integration of any standard 4-20 mA transmitter into the LonWorks digital network

bullet

Supports loop and self powered sensors

bullet

Digitally calibrated at the factory for high accuracy.  Additionally, the customer can re-calibrate the unit for custom input ranges

bullet

Compact DIN Rail mount enclosure that is only 71 mm (2.8”) W x 90 mm (3.54”) L x 58 mm (2.28”) H footprint

bullet

All data is available using Standard Network Variables (SNVT)

bullet

Analog inputs can be processed as digital inputs with custom trigger points

bullet

Analog inputs can be averaged over multiple samples

 		Home
Up
Send mail to webmaster1@neurologic-research.com with questions or comments about this web site.
Copyright © 2005, NeuroLogic Research Corporation
Last modified: December 07, 2005