Model 1150

Home Products Contact Us

Model 10
Model 25
Model 30
Model 40
Model 60
Model 65
Model 110A
Model 1100A
Model 1150
Model 1175
Model 1180
Model 1200A
Model 1250
Model 1300
Model 1400A
Model 1420A
Model 1450
Model 1600
Model 1650
Model 2000T
Model 2150
Model 2200
Model 2300
Model 2500
Model 2800
Model 34xx

(Building Automation)
Model 1150:    Indoor Temperature Network Transmitter

Datasheet     XIF File

Description

The Model 1150 is an indoor temperature transmitter that is self-contained.  It contains the temperature sensor, microprocessor, measurement electronics, and network communication interface. 

The temperature sensor is located away from the electronics in a separate compartment.  This allows a more accurate measurement of air temperature for two reasons.  One, it isolates the sensor from temperature generated by the electronics.  Two, it provides excellent airflow around the entire sensor.

The sensor and configuration information is communicated to other devices via the LonWorks communication protocol.  This allows multiple sensors to be used over a simple four-wire bus installation.

Key Features

bullet

Low cost transmitter for indoor temperature monitoring

bullet

0.5oC typical accuracy

bullet

Mounts on any standard single-gang wiring conduit box

bullet

Compact, thin and stylish design.  Only 71 mm (2.8”) W x 116 mm (4.55”) H x 20 mm (0.79”) D

bullet

Sensing element is isolated from electronics for more accurate air temperature measurement

bullet

Open communication standard using LonWorks Protocol

bullet

All outputs available using Standard Network Variables (SNVT)

 		Home
Up
Send mail to webmaster1@neurologic-research.com with questions or comments about this web site.
Copyright © 2005, NeuroLogic Research Corporation
Last modified: December 07, 2005